Thermal Disk Steam Trap (CS19H)-Steam trap series-疏水阀厂家-上海冠环阀门制造有限公司

Working principle

The thermal power disc steam trap uses the flow rate and volume of steam and condensate to change different thermodynamic properties when passing through the valve hole, driving the valve plate to switch the seat hole, so as to prevent steam drainage.

Structural characteristics

1, the valve structure is strong, light weight, small size, the use of large pressure range, without any adjustment.

2, with air discharge device, quickly eliminate the initial air, to ensure fast start.

3, can withstand overheating air, strong freezing resistance, installation is not limited.

Material of main parts

Sequence Number	Name	Materials
1	body	WCB、SS304
2	sieve	SS304
3	gasket seal	PPL
4	bottom cap	Q235、WCB、SS304
5	gasket seal	PPL
6	valve seat	SS304
7	gasket seal	PPL
8	valve block	SS304
9	valve seat	Q235、WCB、SS304
10	protecting cover	Q235、WCB、SS304

Prime out-form dimensions

Product model	Nominal diameter (mm)	Connection Type	Working pressure Radius (Mpa)	Maximum permissible temperature ( ℃ )	boundary dimension
Product model	Nominal diameter (mm)	Connection Type	Working pressure Radius (Mpa)	Maximum permissible temperature ( ℃ )	L	H	H2	W
CS19W-16-40C CS19H-16-40C	15	thread	0.05-40	425	80	47	54	47
	20	thread	0.05-40	425	90	52	59	57
	25	thread	0.05-40	425	95	59	62	57
	32	thread	0.05-40	425	105	70.5	89.5	80
	40	thread	0.05-40	425	110	70.5	89.5	80
	50	thread	0.05-40	425	120	70.5	104.5	80