Jacketed insulation ball valve-Ball valve series-球阀厂家-上海冠环阀门制造有限公司

Jacket insulated ball valvefeatures

The jacketed insulated ball valve has good insulation and cold insulation characteristics, and most of it is used to transport high viscosity media that will solidify at room temperature; Widely applicable to system pipelines in industries such as chemical, petroleum, pharmaceutical, and metallurgical industries, such as heavy oil, rubber, and other conditions that are prone to solidification.

Product Features

1. Small fluid resistance, the resistance coefficient and with the length of the section is equal;
2. Simple structure, small volume, light weight;
3. Good sealing, also has been widely used in vacuum system;
4. Quick 90°switch for remote control;
5. Easy to replace and maintain;
6. In the full open or full close, sphere and valve seat sealing surface and the dielectric isolation, medium through, does not cause the valve sealing surface erosion;
7. Wide applicable scope, size from small to several millimeters, big to a few meters, from high vacuum to high pressure can be applied. Ball rotated 90 degrees in the inlet and outlet should be completely present spherical, thereby broken flow.

Jacket insulated ball valve main connection size (mm)

DN		Flange specifications	Size (mm)							Weight (Kg)
DN		Flange specifications	d	L	H	W	E	Q.	P	Weight (Kg)
inch	DN	150,300 Lb; 10K, 20K
1/2	15	15 * 40	15	110	101	130	58.5	147	NPT3 / 4	5
3/4	20	20 * 40	19	117	101	160	58.5	147	NPT3 / 4	6
1	25	25 * 50	25	127	106	160	63.5	156	NPT3 / 4	9
1 1/2	40	40 * 65	38	165	125	230	62.5	181	NPT3 / 4	15
2	50	50 * 80	51	178	135	230	68	218	NPT3 / 4	21
3	80	80 * 150	76	229	193	400	82	275	NPT3 / 4	38
4	100	100 * 200	102	254	265	700	83	300	NPT3 / 4	70
6	150	150 * 250	152