Electric flat gate valve-Oilfield valve series-油田阀厂家-上海冠环阀门制造有限公司

Product Structure Features

1. The body has two structures: casting and welding.
2. The seat adopts O-ring sealing and floating valve seat structure that applies preload, so that the valve inlet and outlet are sealed in both directions; And the opening and closing torque of the structure is only 1/2 of the ordinary valve, which can easily open and close the valve.
3. The seat adopts PTFE embedded on the sealing surface, which has the double sealing of PTFE to metal and metal to metal, and the PTFE sealing surface removes the dirt of the gate plate at the same time.
4. Metal-to-metal sealed valve, the outside of the valve body is equipped with grease injection structure, grease enters the valve sealing surface through the grease injector and valve seat, so that the valve reaches zero leakage.
5. The gate plate with diversion hole valve, whether it is fully open or closed, always coincides with the sealing surface, and the sealing surface is protected from direct washout by the medium, thereby prolonging the service life.
6. When the valve is fully open, the channel is smooth into a straight line, the flow resistance coefficient is extremely small, there is no pressure loss, and the pipeline can be cleaned through the hairball.
7. The valve adopts packing structure with self-sealing ability, no need to adjust frequently, the opening and closing are extremely light, and the sealing is reliable, and the filling box is equipped with auxiliary sealing grease injection structure, the sealing performance is reliable, and the real zero leakage is achieved; It solves the drawback of easy leakage at the packing of the general valve.
8. When the valve is closed, it can automatically remove the high pressure of the inner cavity to ensure the safety of use.
9. Fully enclosed structure, good protection performance, can adapt to all-weather requirements.
10. The valve is equipped with an indicator rod or observation window to indicate the opening and closing of the valve.

Main Dimensions

Nominal pressure （MPa）	Nominal diameter （MPa）	Size（mm）
Nominal pressure （MPa）	Nominal diameter （MPa）	L	D	D1	D2	b	f	z-d	H	H1	E	W
1.6	40	165	150	110	84	18	3	4-18	365	415	90	305
	50	178	165	125	99	20	3	4-18	387	455	105	305
	65	190	185	145	118	20	30	8-18	466	545	133	305
	80	203	200	160	132	20	3	8-18	520	645	156	305
	100	229	220	180	156	22	3	8-18	655	740	182	305
	150	267	285	240	211	24	3	8-22	823	980	269	305
	200	292	340	295	266	24	3	12-22	1010	1210	350	305
	250	330	405	355	319	26	3	12-26	1220	1470	412	305
	300	356	460	410	370	28	4	12-26	1405	1805	505	305
	350	381	520	470	429	30	4	16-26	1580	1950	560	305
	400	406	580	525	480	32	4	16-30	1777	2197	665	305
	500	457	715	650	609	36	4	20-33	2132	2652	817	458
	600	508	840	770	720	38	5	20-36	2545	3201	920	458
2.5	40	165	150	110	84	18	3	4-18	365	415	90	305
	50	178	165	125	99	20	3	4-18	387	455	105	305
	65	191	185	145	118	20	3	8-18	466	545	133	305
	80	203	200	160	132	24	3	8-18	520	645	156	305
	100	229	235	190	156	24	3	8-22	655	740	182	305
	150	267	300	250	211	28	3	8-26	823	980	269	305
	200	292	360	310	274	30	3	12-26	1010	1210	350	305
	250	330	425	370	330	32	3	12-30	1220	1470	412	305
	300	356	485	430	389	34	4	16-30	1405	1805	505	305
	350	381	555	490	448	38	4	16-33	1580	1950	560	305
	400	406	620	550	503	40	4	16-36	1777	2197	665	305
	500	457	730	660	609	44	4	20-36	2132	2652	817	458
	600	508	845	770	720	46	4	20-39	2545	3201	920	458

Flat gate valve with diversion hole

Flat gate valve

Flat gate valve（Electric）

Pneumatic non-deflecting flat gate va…

High pressure flat gate valve